Why we built the 1500W Infrared Heater for Semi-Open Spaces
Here is the problem with heating a gazebo or a changing room: you can’t actually heat the air. If you use a standard heater, the warmth just floats up to the ceiling or drifts away with the first breeze. You’re basically paying to heat the outdoors. That’s why we went with infrared. Instead of fighting the wind, it sends heat directly to your skin and clothes. It feels more like standing in the sun on a crisp autumn day. The power behind it We settled on 1500W because open-air spaces are greedy—they suck the heat right out of you. To fight that, we used short and medium-wave emitters. The best part? There’s no waiting around for an oil tank to warm up or a fan to kick in. You flip the switch, and you feel it. Immediately. By mounting these in the ceiling, we create a cozy “heat zone” right where you’re actually standing. The nitty-gritty on setup Since these live overhead, we added high-grade reflectors. These act like a mirror for heat, pushing everything down toward you instead of letting it soak into your roof. One quick tip: 1500W is a decent pull on your electricity. If you’re planning to install a few of these on one circuit, double-check your amperage. You don’t want to be sitting in the dark because you tripped a breaker in the middle of January. A few things to keep in mind Infrared is directional. Think of it like a flashlight, but with heat. If you step out of the “beam,” you’ll feel the chill again. You can’t exactly “fill” a porch with warmth, so the trick is to plan your layout based on how far the heat actually reaches. And since these often go in damp spots—like a poolside changing area—we coated the housing to stop rust before it starts. Just a heads-up: these units gethot. Really hot. When you’re installing them, make sure you leave plenty of breathing room between the heater and your ceiling material so you don’t accidentally scorch anything.